Flexseal Icon Pushfit copes with different internal diameters
Flexseal’s innovative Icon Pushfit connector offers installers a way to create a way to create a reliable, permanent watertight seal – even when dealing with pipes of different internal diameters.
UK drainage networks are made up or varying pipe sizes and materials, some old, some new. Its common knowledge that the outside diameters of the same DN size pipes can be dramatically different. However, it is sometimes assumed that the internal diameters are the same, and in the most part that’s true; advances in technology have allowed pipe manufacturers to gain greater control in the output. Nonetheless, the UK still has a vast network of old pipe lines that differ in terms of the internal diameters.
To ensure contractors have a solution for small differences in internal diameters when connecting to the internal surface of pipes, Flexseal can offer a 4-inch Icon Pushfit range of couplings that will connect any DN100 drainage pipe material. The size differences outlined below give installers the choice they need.
Product code IC95P, 93-98mm, typically connects to 4-inch old clay. Product code IC100P, 99-103mm, typically connects to 4-inch plastic, 4-inch cast iron and 4-inch new clay. Product code IC95-100P (93-98mm one end, 99-103mm other end) typically connects 4-inch old clay to 4-inch plastic, 4-inch cast iron and 4-inch new clay.
Ends
Article supplied by:
Flexseal
Tel: 01226 340 888
Email: sales@flexseal.co.uk
Web: https://www.flexseal.co.uk/