Mayfield Manufacturing Ltd

Mayfield Manufacturing Company Profile

Mayfield Manufacturing Ltd is a small family run building company, established since 1985 by Malcolm Hickson. As a NHBC registered builder wanting to comply with Water Byelaw 58 Malcolm tried to find a product which would allow easy access to pipework. When he couldn’t find it, he designed his own – ALUDUCT.

A few years later ALUDRAIN was designed for low-level thresholds.

Both these products have been specified by architects and recommended by Councils and local Water Authorities.

Clients include Lovell, George Wimpey, Persimmon Homes, Allison Homes, Kier Partnership Homes, Mowlem plc, R G Carter, Jewson’s, Grafton’s, plus many other builders and Housing Associations.

ALUDUCT

Flush Floor Ducting for Pipes & Cables

ALUDUCT has been specifically designed for carrying water supply and central heating pipework in floating and cement screed floors.

Manufactured in aluminium, 2mm thick, ALUDUCT is immensely strong and easy to work with. Complies fully with Water Authority Bylaw 58, providing easy access to pipework at all times, for testing and inspection.

Advantages & Possibilities of ALUDUCT.

• Labour saving and cost effective - plumber able to complete job totally after other trades have finished. Prevents pipes being damaged by other trades and allows plumber to see all pipe work, saving time when testing.
• Allows shortest route possible to be taken without weakening the floor
• Unique internal lip allows original floor or insulating board to be replaced following installation.
• ALUDUCT can be fitted after the floating floor and radiators are in place
• Suitable for all floating floors
• Suitable for cement screed floors
• Easily anchored to prevent the duct from lifting in screed floors
• Easy access to check for leaks following pipe installation
• No expensive accessories required
• ALUDUCT can be used as a straight edge for cutting out purposes
• Pipes can be sweated without danger of heat-buckling (as can occur with plastic ducting) Heat conducts along aluminium thus preventing heat spots. Pipes have room for expansion when hot water starts to flow through, preventing possible pipe fracture.
• Once ALUDUCT has been nailed back to the chipboard it maintains the floor's floating ability.
• Prevents costly insurance claims, as leaks easily identified and accessible. No digging up of floors required, Prevents extensive work to find leak and disruption to householder.

ALUDRAIN

Drainage System for Low-level Thresholds

ALUDRAIN provides excellent drainage and easy accessibility for wheelchairs. Anti-slip surface for added safety. Complies with building regulations for a drained, vented area in front of low level thresholds. Suitable for all commercial and industrial use.

Advantages and possible uses of ALUDRAIN

• Easy, cost effective installation
• Allows excellent drainage
• Easy access for wheelchair users
• Flexible to fit any size threshold, old or new
• High quality aluminium extrusion
• Stylish anodised aluminium design
• Fits to any exterior surface
• Anti-slip surface
• Can be provided in 3m lengths or cut to customers' specific requirements
• Available in 2 widths (130mm &185mm)
• Right angles and 40mm polypipe drain junctions and stop-ends available

For more detailed information please contact us using the buttons above or visit the company website.